NetComm NF18ACV - VDSL Static IP Setup; VDSL Bridge Mode Setup

16
Static IP
Enter the WAN IP Address, WAN Subnet Mask,
WAN Gateway IP Address, Primary DNS server and
Secondary DNS server, 802.1P priority and VLAN Tag
required by your ISP. If you are unsure of these, contact
your ISP. Click the Next > button when you have
nished.
Bridge
Enter the 802.1P priority and VLAN Tag required by
your ISP. If you are unsure of these, contact your ISP.
Click the Next > button when you have nished, then
skip to the Gateway Security section of this guide.