NetComm CloudMesh Satellite NS-02 User Manual

11 of 22
CloudMesh Satellite – User Guide
UG01350 v1.00 14 July 2021
When connected to the CloudMesh Gateway, the LED shows the signal strength as follows:
LED LED activity Meaning
Solid white Good signal
Solid blue Medium signal
Solid red Poor signal
Blinking
blue
No signal / too far from gateway / not connected to mesh
network
Blinking
purple
WPS pairing activated
F i gure 5 - LED signal strength statuses
The LED may also display the following statuses.
LED LED activity Meaning
Solid pink Paired but no Internet connection
Blinking purple WPS pairing activated
Blinking pink Pairing in progress
Solid green Wired connection to the gateway.
F i gure 6 - Additional LED statuses
Connecting client devices
You can connect any number of Wi-Fi enabled client devices to the internet via the CloudMesh Satellite using
the WPS (Wi-Fi Protected Setup™) functionality of each device.

NetComm CloudMesh Satellite NS-02 Specifications

General

Brand	NetComm
Model	CloudMesh Satellite NS-02
Category	Wireless Access Point
Language	English