4. Ensure Enable Wireless is ticked and Hide Access Point is unticked.
5.
Your SSID will be displayed in the SSID field. This is the name of your network and
you may change this if desired.
If you choose to change the SSID, please make a note of this as this will be used to
connect to your network in a later step.
6. Click Apply/Save to allow changes to take effect.
7. Click on Security from the left-hand menu
8. Ensure Enable WPS is set to Disabled.
9. For this example, WPA2-PSK is being used as the Network Authentication type.
10. Click on Click here to display to view your current Network security key.
Make a note of this, as it will be used to connect to your network in a later step.
11. Click on Apply/Save to allow any changes made to take effect.
To Next Page
Loading...
Need help?
General
