NetComm NF20 - Required Information; Setup Steps

11
CONFIGURING YOUR GATEWAY
To complete the setup, you will need the following
information from your service provider:
- Internet service type (ADSL/VDSL/Ethernet WAN)
- Connection type (PPPoE/PPPoA/Dynamic IP/Static IP)
- Other specics depending on your connection
type including 802.1P priority, VLAN Tag, WAN
IP Address, Subnet Mask and DNS Servers
- VoIP settings from your service provider if
you intend to use a phone with your service.
When you have the necessary information, follow these steps:
1. Open a web browser and type 192.168.20.1
into the address bar, then press Enter.
2. At the login screen, type admin into the Username eld. In the
Password eld, type the unique password printed on the label on
the bottom of the gateway, then click on the Login > button
3. Follow the Basic Setup to complete the conguration.