Need help?Do you have a question about the NetComm NP127 and is the answer not in the manual?
General| Frequency Band | 2.4GHz |
|---|---|
| Wireless Speed | 300Mbps |
| Encryption | 128-bit AES |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% Non-Condensing |
| Product Type | Powerline Extender |
| Wireless Standards | IEEE 802.11n |
| Security | WPA, WPA2 |
| LED Indicators | Power, Ethernet, Wireless |
| Ports | 1 x Ethernet (RJ-45) |
NP127 repeats wireless signal to extend network coverage.
NP127 connects via Ethernet to provide wireless signal.
Description of LEDs and WPS button on the front panel.
Description of reset, Ethernet, and power ports on the bottom panel.
Steps to connect wirelessly to the NP127 via WiFi.
Steps to connect to the NP127 using an Ethernet cable.
Guide to connecting the NP127 to your router in Repeater Mode.
Steps to configure the NP127 in Access Point Mode.
To Next Page