HOW IT WORKS
The NP127 has two modes of operation:
1. Repeater mode (default) – the NP127 repeats the wireless signal of your existing network
to provide coverage to a greater area of your premises
2. Access Point mode – the NP127 connects to an existing router via Ethernet and provides
a wireless signal for wireless devices. This is useful in situations where there is no existing
wireless access point or where you wish to provide a wireless signal to a remote area (up
to 100 metres) from where the router is located.
Laptop
PC
Smartphone
NP127
2.4/5GHz
Router
Internet
Ethernet cable
up to 100m
Laptop
PC
Smartphone
NP127
2.4/5GHz2.4/5GHz
Router
Internet
To Next Page
Loading...