Need help?Do you have a question about the NetComm NP205 and is the answer not in the manual?
Connects the router to the first powerline adapter via Ethernet, then plugs the adapter into a power point.
Connects a device to the second powerline adapter via Ethernet and plugs it into a power point.
Explains the meaning of Powerline LEDs based on color and status for data transfer and connectivity.
Provides steps to reset and pair powerline adapters to ensure they connect to each other.
Connects an additional adapter to a powerboard or powerpoints near existing ones.
Resets an adapter and puts it into pairing mode by pressing the Simple Connect button.
Completes the pairing by holding the Simple Connect button to link new adapters.
To Next Page
General
