Need help?Do you have a question about the NetComm NP508 and is the answer not in the manual?
Explains the functionality and technology behind Powerline adapters.
Recommends direct connection to wall outlets for optimal performance.
Describes the feature of an adapter with a built-in pass-through socket.
Lists the main components and accessories included in the package.
Details the interfaces and indicators specific to the WiFi adapter.
Details the interfaces, indicators, and functions of the AC Passthrough adapter.
Step-by-step guide on establishing a new Powerline network using Simple Connect.
Instructions for resetting the Private Network Password using the Simple Connect button.
Procedure to add a new device to an established Powerline network.
Explains how Powerline Activity LED colors indicate connection speed and quality.
Describes the adapter's power saving mode behavior when inactive.
Provides ideas and diagrams for planning various Powerline network setups.
Diagram illustrating sharing internet connection within the house.
Diagram showing connection of gaming consoles for online play.
Diagram for experiencing IPTV streaming to home entertainment systems.
Diagram for converging IP devices onto a single network for integration.
Step-by-step instructions on how to access and log into the web interface.
Details the information displayed on the Status page, including device and network info.
Shows packet information for network connection and packet statistics.
Provides information on Ethernet, WLAN, and PLC interfaces.
Displays details about detected remote Powerline adapters on the network.
Allows modification of wireless radio settings like SSID, channel, and encryption.
Configuration options for wireless standards, channel, and transmission power.
Configuration for network authentication and encryption types like WPA2-PSK.
Settings for enabling/disabling PLC, and changing Network Password.
Allows adding additional remote Powerline devices and managing their settings.
Allows changing the administrator password for accessing the unit's web interface.
Options to upgrade firmware, restart the device, or restore factory defaults.
Procedure to upgrade the Powerline adapter's firmware using the Management page.
Manual procedure to restart the adapter without removing it from the power socket.
Instructions on how to reset the adapter to its original factory default settings.
Guide to manually changing the Private Network Password for local Powerline adapters.
Steps to change the Private Network Password of remote Powerline devices.
Lists the minimum system requirements for installing and running the Powerline Utility.
Steps for downloading and installing the Powerline Utility software.
Instructions on how to launch the Powerline Utility application.
Overview of the Home tab, its tasks, and network card selection.
Guide to changing the Private Network Name for the local Powerline adapter.
Procedure to change the Private Network Name of remote Powerline devices.
Allows simulation of Simple Connect button functions for local devices.
Explains QoS modes and steps to enable and select a QoS mode.
Displays information about detected remote Powerline adapters and their connection rates.
Steps to upgrade the firmware using the Powerline Utility.
Procedure to reset the adapter to factory default settings using the Powerline Utility.
Details the conditions and terms under which the product warranty is granted.
Outlines the limitations and exclusions applied to the product warranty.
Information on standard warranty period and options for extended warranty.
To Next Page
General
