Powerline Utility User Interface
The Powerline Utility user interface is divided into tabs. These tabs include:
Home
Private Network Name
Quality of Service
Devices
Firmware Upgrade
Home
The Home tab provides a list of all the possible tasks you can perform in the Powerline Utility. To start a task, you first need to select
the network card connected to your Powerline adapter. This is most helpful when you have more than one network card in your
computer. When you select a network card, the MAC Address of the Powerline adapter connected to your computer appears. If
there is no Powerline adapter connected to your computer, no MAC address will appear.
To Next Page
Loading...
Need help?
General
