NetComm NP508 User Manual

16
NP508 – 500Mbps Powerline Adapters User Guide
www.netcommwireless.com
Network page
WLAN Settings
Allows you to modify wireless radio settings.
Radio Settings
ITEM
DESCRIPTION
Mode
Allows you to change the wireless standard implemented in your Powerline adapter.
Channel
Define the Wireless Channel. The channel list can differ depending on the mode selected.
Transmission Power
Sets the value of the transmission power. The highest transmission power setting is 1 while
5 is the lowest setting.
Wireless Settings
ITEM
DESCRIPTION
Enable Wireless
Turns the wireless radio on or off.
Cancel Broadcast
When selected, the broadcast of the SSID is disabled.
SSID
The wireless network name.
BSSID
The MAC address of the wireless interface.
Wireless Security Mode
ITEM
DESCRIPTION
Network Authentication
You may configure wireless security features. The Powerline adapter supports 3
Wireless Security Mode including WEP, WPA-PSK, WPA2-PSK and EAP.
WPA Passphrase Key
The security key used to authenticate wireless clients on the network.
WPA Encryption
Select the encryption type. You may select from AES, TKIP or TKIP/AES.

NetComm NP508 Specifications

General

Brand	NetComm
Model	NP508
Category	Adapter
Language	English