v1.10.40.7
New Features
Changed uboot sequence to reduce component stress during device boot.
Added support for DoCoMo MOPERA (Static IP) service in WebUI
v1.10.40.4
New Features
Added support for USB OTG ‘Device’ mode auto-detect.
Enhancements
Fixed: Connection uptime doesn’t sync with System uptime.
Fixed: WWAN/3G connection detection failure.
Fixed: UDP traffic inhibited when modem emulator is ON.
Fixed: IPSec local ID/Remote ID not working.
Fixed: Local access to web UI intermittently lost.
Fixed: WWAN connection instability when using USB Host mode.
Fixed: External USB port not switching automatically between modes.
Fixed: Modem emulator not functioning correctly when used in conjunction with external USB port (Device mode).
Fixed: Reset to factory default settings in recovery mode doesn’t clear session history records.
Fixed: Backup configuration file doesn’t include local access control settings.
Fixed: Backup configuration file doesn’t include manual operator selection settings.
Fixed: Backup configuration file doesn’t include band settings selection.
Fixed: SSH not working correctly.
Fixed: Cosmetic issues in web UI.
v1.10.40.3
New Features
Added support for USB 2.0-to-Ethernet adapters.
Added support for USB-to-Serial convertors.
Added support for USB mass storage devices (USB / flash drive, hard drive etc).
Added support for NTFS based USB mass storage devices.
Added support for IPSec private Openssl generated keys.
Added support for using domain name to configure IPSec/GRE/OpenVPN-client.
Added support for USB OTG port to auto-detect 'Host' mode.
Added support for using modem emulator on serial external port.
Added support for flow control mode (Xon/Xoff) for serial interface mode RS-232.
Added support for selecting all/part of SMSs on inbox/sent items as a group.
Added support for resetting unit to factory defaults via SNMP.
Added support for retaining SNMP configurations after resetting to factory defaults via SNMP / TR-069.
Added support for launching multiple PPTP tunnels simultaneously.
Added support for ALL (‘0.0.0.0’) IP addresses and subnet mask prefix ‘/0’.
Enhancements
Implemented IO control functionality.
Implemented updated User Guide / Quick Start Guide.
Fixed: WWAN connection unstable during bi-directional UDP stress test.
To Next Page
Loading...
Need help?
General
