Need help?Do you have a question about the NetComm ROUTER WITH VOICE 3G10WV and is the answer not in the manual?
General| Brand | NetComm |
|---|---|
| Model | ROUTER WITH VOICE 3G10WV |
| Category | Network Router |
| Language | English |
The purpose of this manual is to provide you detailed information on the installation, operation and application of your HSPA 7.2Mbps Wi-Fi Router with Voice.
Before servicing or disassembling this equipment, always disconnect all power or telephone lines from the device.
This HSPA 7.2Mbps Wi-Fi Router with Voice provides you with triple-band coverage through expanding cellular networks.
This HSPA Wi-Fi Router with Voice allows you to share your 3G connection with multiple wireless or wired devices.
Your package contains the following: 3G10WV - HSPA 7.2Mbps Wi-Fi Router with Voice, Printed Quick Start Guide, etc.
The front panel LED indicators are shown in this illustration and followed by detailed explanations in the table below.
The rear panel contains the ports for data and power connections.
These steps explain how to quickly setup your 3G router: Attach the two 3G antennas provided to the ports marked Main and AUX.
The following are the default settings for the device. Local (LAN) access (username: admin, password: admin).
When your Router powers up, the Dynamic Host Configuration Protocol (DHCP) server (on the device) will start automatically.
Open a web browser and enter the default IP address for the Router in the Web address field. In this case http://192.168.1.1.
The web user interface (WUI) is divided into two window panels, the main menu (on the top) and the display screen (on the bottom).
Select your 3G service settings according to predefined or custom profiles. Setup instructions are provided in the following sections.
This screen allows for changes to the 3G SIM card PIN code protection settings.
This page allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface...
This Router includes a number of security options that provides you with a secure connection to a 3G network.
This screen allows you to control the following advanced features of the Wireless Local Area Network (WLAN) interface.
This option allows access to be restricted based upon the unique 48-bit MAC address.
This screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to configure wireless bridge features.
This screen appears when you select Station Info, and shows authenticated wireless stations and their status.
The Device Settings screens allow you to backup, retrieve and restore the default settings of your Router.
The following screen appears when selecting Update Firmware. By following this screens steps, you can update your Routers firmware.
The Simple Network Management Protocol (SNMP) allows a network administrator to monitor a network by retrieving settings.
This screen allows you to configure the time settings of your Router. To automatically synchronize with Internet timeservers.
The Access Control option found in the Management drop down menu, configures access related parameters.
This function saves the current configuration settings and reboots your Router.
This screen allows you to configure the Local Area Network (LAN) interface on your Router.
Configures Port Forwarding, Port Triggering, and DMZ Host for network address translation.
The IP Filtering screen sets filter rules that limit incoming and outgoing IP traffic.
This Parental Control allows you to restrict access from a Local Area Network (LAN) to an outside network.
Default Gateway, Static Route and Dynamic Route settings can be found in the Routing link.
If the Enable Automatic Assigned DNS checkbox is selected, this device will accept the first received DNS assignment.
The Dynamic DNS service allows a dynamic IP address to be aliased to a static hostname.
Once your 3G10WV has been correctly configured to access the mobile network as outlined in Section 2.1 Quick Setup.
The Diagnostics menu provides feedback on the connection status of the device. The individual tests are listed below.
This function allows you to view system events and configure related options. Follow the steps below to enable and view the System Log.
Select this option for detailed status information on your Routers 3G connection.
These screens provide detailed information for: Local Area Network (LAN) and Wireless Local Area Network (WLAN).
The PING menu provides feedback of connection test to an IP address or a host name.
List all available CLI commands that the 3G router supports.
Display the 3G radio signal strength. Display the 3G band. Display the 3G network connection status.
Allows user to configure the Wireless LAN interfaces on the 3G router. This command can be use to configure basic feature.
Enable, disable and configure the wireless LAN MAC filter feature. This feature enables the router to allow or deny connection.
To list and to configure access control from LAN & WAN.
If you have any technical difficulties with your product, please do not hesitate to contact NetComm's Customer Support Department.
To Next Page
