NetComm ROUTER WITH VOICE 3G10WV User Manual

56 – 3G10WV HSPA Wi-Fi Router with Voice
7.4.2 Static Route
The Static Route screen displays the configured static routes.
Click the Add or Remove buttons to change settings.
Click the Add button to display the following screen.
Enter Destination Network Address, Subnet Mask, Gateway IP Address and/or WAN Interface. Then click
Save/Apply to add the entry to the routing table.

NetComm ROUTER WITH VOICE 3G10WV Specifications

General

Brand	NetComm
Model	ROUTER WITH VOICE 3G10WV
Category	Network Router
Language	English