Placement of Your Device
It is recommended that you plan on what you are going to connect to your NP202Wn and how you are going to connect to it. Once
decided you can place your device in the most convenient location.
With two LAN ports you can connect up to two devices by Ethernet cable to the NP202Wn. There are no restrictions to what you can
connect, as long as the device has a free Ethernet port and is Internet enabled. It is recommended that you connect the NP202Wn as
close as possible to the devices that you want to connect by Ethernet.
You are also able to connect devices to the NP202Wn via the built-in wireless access point. It is recommended that you position the
NP202Wn as close as possible to the centre of the devices that you wish to connect by wireless.
Connecting via Wireless
1. Before plugging in your Powerline adapter into the wall socket check the sticker and write down the wireless SSID.
2. Once you are successfully connected to a Powerline network (as previously detailed), you are able to share it via wireless.
3. Open the wireless utility/wireless network display that shows all available wireless networks on the device that you wish to connect
to the NP202Wn.
4. Search for the wireless SSID that you wrote down in step 1 and connect to it.
To Previous Page
Loading...
Need help?
General
