Product Manual, TNSR 19.02
1.1.3 Netgate 1537 Secure Router Manual
This Quick Start Guide covers the first time connection procedures for the Netgate 1537 1U Secure Router and also
provides information needed to stay up and running.
Getting Started
Use the following steps to configure the TNSR Secure Router.
1. To configure the Network Interfaces and gaining access to the Internet, follow the instructions provided in the
Zero-to-Ping documentation.
Note: Not all steps in the Zero-to-Ping documentation will be necessary for every configuration scenario.
2. Once the Host OS is capable of reaching the Internet, check for updates (Updating TNSR) before proceeding.
This ensures the security and integrity of the router before TNSR interfaces are exposed to the Internet.
3. Finally, configure the TNSR instance to meet the specific use case. The topics are listed on the left column of
the TNSR Documentation site. There are also TNSR Configuration Example Recipes that might be of assistance
when configuring TNSR.
Input and Output Ports
Contents
• Input and Output Ports
– Default Configuration
*
Network Ports
*
Other I/O
*
Status LEDs
– With CPIC-8955 Accelerator Card with Intel® QuickAssist Technology
– With 2 Port Intel 1 Gbps Ethernet Expansion Card
– With 2 Port Intel 10 Gbps X710 SFP+ Expansion Card
1.1. Netgate Appliances 25
To Next Page
Loading...