Product ManualXG-7100
• 1x USB 3.0
• Status LED
• Power (PWR) LED (green when powered on, red after a graceful shutdown)
• Console (Mini-USB)
• 2x USB 2.0
Note: When a graceful shutdown is performed, the XG-7100 Power (PWR) LED will turn red but will stay lit. The
Ethernet activity LEDs will turn off. The power supply fan will continue to run. Turning off the rocker switch on the
back of the power supply will eliminate all power to the system.
The power button should be depressed 3-5 seconds to initiate a graceful shutdown or to power on the device when the
PWR LED is red.
Warning: A hard reset of the system could cause data corruption and should be avoided. Halt or reboot the
system through the console menu or the web configurator to avoid data corruption.
1.2. Other Ports, Buttons, and Indicators 3
To Next Page
Loading...