Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Preparing Your Network C-21
202-10090-02 v 1.4, July 2005
Restarting the Network
Once you’ve set up your computers to work with the firewall, you must reset the network for the
devices to be able to communicate correctly. Restart any computer that is connected to the firewall.
After configuring all of your computers for TCP/IP networking and restarting them, and
connecting them to the local network of your WGT624 v3 wireless router, you are ready to access
and configure the firewall.
To Next Page
Loading...
