Need help?Do you have a question about the NETGEAR EX6110 and is the answer not in the manual?
General| Type | Network transmitter & receiver |
|---|---|
| WPS push button | Yes |
| Maximum transfer distance | - m |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Security algorithms | WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Product color | White |
Weight and Dimensions| Width | 72.5 mm |
|---|---|
| Height | 64.8 mm |
| Weight | 152 g |
Introduction to the extender's hardware components and features.
Describes the status indicators on the extender device.
Explains the function of each physical button on the extender.
Guides on optimal placement and scenarios for using the extender.
Explains the operational principle and function of the WiFi range extender.
Comprehensive guide to setting up the WiFi range extender.
Instructions for physically positioning and powering on the extender.
Details on connecting the extender to your current WiFi network.
Guides on using the WPS feature for network connection.
Step-by-step guide for setting up using the NETGEAR installation assistant.
Tips for selecting the optimal physical location for the extender.
Instructions on accessing the extender's web interface post-setup.
Guide to using the Smart Setup wizard for configuration.
How to list and check devices connected to the extender network.
Optimize streaming performance using FastLane technology.
Check current WiFi configuration details of the extender.
Steps to modify the SSID for the extender's wireless network.
Guide to hiding the extender's WiFi network name (SSID).
How to turn the extender's 2.4 GHz and 5 GHz WiFi bands on or off.
How to adjust the WiFi transmission speed for the extender.
Connect devices using the WPS push button method.
Connect devices using the WPS PIN method.
Block specific devices from connecting using MAC filtering.
Create a schedule to control internet access times.
Rename the extender on the network.
Assign a fixed IP address to the extender.
Use MAC filtering to control network access.
Modify the administrator login credentials for the extender.
Enable or disable password protection for the extender.
Retrieve lost admin login credentials via security questions.
Configure the extender to automatically update for DST changes.
Manually set the extender's internal clock.
Save the extender's current configuration settings.
Load previously saved configuration settings onto the extender.
Reset the extender to its original factory settings.
Use the physical reset button to perform a factory reset.
Perform a factory reset through the web interface.
Overview of firmware update procedures.
Check for and install new firmware automatically.
Manually install a firmware file onto the extender.
Answers to common questions and issues encountered with the extender.
Troubleshooting steps for when connection to the extender fails.
Solutions for problems connecting to a WiFi network.
Troubleshooting tips for accessing the extender's web interface.
Guide on how to locate the extender's IP address.
Lists the default configuration parameters of the extender.
Details the physical, environmental, and interface specifications.
To Next Page
