NETGEAR EX6200 Instructions

16
What are the default user name and password to log in to the
extender?
If you are online at http://www.mywifiext.net, you can use the
following to log in:
• User name. admin
• Password. password
My router security is WEP, and I entered the wrong
passphrase or security key on the extender. I cannot access
the extender anymore. What can I do?
The extender cannot check to see if the WEP passphrase is correct.
If you entered the wrong passphrase, your wireless device is not
able to get the IP address from the extender. You must reset the
extender to the factory defaults to get the IP address back.
Will the extender work if I connect it to my main WiFi router
with an Ethernet cable?
No, your extender is designed only to connect wirelessly to the
router.

NETGEAR EX6200 Specifications

Ports & interfaces

ethernet ports	Five (5) 10/100/1000 Ethernet ports
usb port	USB 3.0 port
dual band antennas	Two (2) detachable external antennas

Weight and Dimensions

dimensions	9.92 x 6.85 x 1.22 in (252 x 174 x 31 mm)
weight	0.67 lb (302 g)
antenna gain	5 dBi