Need help?Do you have a question about the NETGEAR EX6400 and is the answer not in the manual?
General| Power plug | - |
|---|---|
| Ethernet LAN | Yes |
| Wi-Fi standards | Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| Security algorithms | WEP, WPA, WPA2-PSK |
| Networking standards | IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Built-in power socket | No |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN interface type | Gigabit Ethernet |
| WLAN data transfer rates supported | 1900 Mbit/s |
| Product color | White |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 81.4 mm |
|---|---|
| Width | 161 mm |
| Height | 44.5 mm |
| Weight | 300 g |
Explains the LEDs and buttons on the extender's front and side panels for status indication.
Instructions for connecting the extender wirelessly to an existing WiFi network.
Guide to setting up the extender as a WiFi access point using a wired Ethernet connection.
Steps to log into the extender's web interface to view or change its settings.
Steps to modify the SSID (network name) of the extender's WiFi.
How to block specific devices from accessing the network using MAC address filtering.
Configure MAC filtering to control network access through the extender for security.
Reset the extender to its original factory default configuration using the reset button or software.
Instructions for checking and installing new firmware for improved performance and features.
To Next Page
