Need help?Do you have a question about the NETGEAR EX6200 and is the answer not in the manual?
Ports & interfaces| ethernet ports | Five (5) 10/100/1000 Ethernet ports |
|---|---|
| usb port | USB 3.0 port |
| dual band antennas | Two (2) detachable external antennas |
Weight and Dimensions| dimensions | 9.92 x 6.85 x 1.22 in (252 x 174 x 31 mm) |
|---|---|
| weight | 0.67 lb (302 g) |
| antenna gain | 5 dBi |
Details on how to unbox the AC1200 WiFi Range Extender and its components.
Explanation of the LEDs on the top panel and the USB port on the front panel of the extender.
Description of the ports, buttons, antennas, and power connector on the rear panel.
Instructions for attaching the stand to the extender for upright placement.
Guidance on attaching the rubber feet for horizontal placement of the extender.
How to find and display the product label containing login information and serial number.
Guidance on optimal scenarios and situations for using the WiFi range extender.
Explanation of the extender's functionality as a bridge between a WiFi router and devices.
Information about the extender's compatibility and benefits with the 802.11ac standard.
Guidance on finding the ideal location for the extender between the router and devices.
Methods for connecting the extender to your WiFi router using WPS, WiFi, or Ethernet.
Step-by-step instructions for connecting the extender to a WiFi network using WPS.
Procedure for connecting and setting up the extender via WiFi using NETGEAR genie Smart Setup.
Procedure for connecting and setting up the extender via Ethernet using NETGEAR genie Smart Setup.
Instructions on how to access the extender's settings interface via a web browser.
Steps to change the default administrator password for enhanced security.
Guide to enabling password recovery options in case the admin password is lost.
Procedure to connect the extender to a WiFi network without using the Smart Setup wizard.
Instructions for connecting the extender to a WiFi network that does not broadcast its SSID.
Method to connect WiFi devices to the extender's network using WPS push button or PIN.
How to change the extender's network name (SSID) and set up WiFi security.
Instructions to modify the extender's IP address and its network device name.
Configuration options for advanced WiFi features and WPS settings.
How to set up and manage a list of approved devices (MAC addresses) to access the network.
Enabling FastLane Technology for improved WiFi performance by dedicating bands.
Procedure to re-run the NETGEAR genie Smart Setup wizard after the initial configuration.
How to connect wired devices like TVs or game consoles using the extender's Ethernet ports.
Steps to recover the admin password if it has been forgotten.
Procedure for backing up and restoring the extender's configuration settings.
How to reset the extender to its original factory default settings.
Instructions on checking for and installing new firmware for the extender.
How to check the extender's current status and network traffic statistics.
Displaying a list of connected wired and wireless devices on the network.
Information on compatible USB drives and file system types supported by the extender.
Steps to connect to and access a USB drive shared by the extender from Windows or Mac.
Using ReadySHARE Vault software for automatic backup of Windows computers to a USB drive.
Guidance on using Time Machine to back up Mac computers to a USB drive connected to the extender.
Configuring access methods (HTTP, FTP, Network Share) for the USB storage device.
Enabling and using the File Transfer Protocol (FTP) to access files on the USB drive.
How to view the network folders and their access permissions on a USB drive.
Procedure to create and configure new network folders on the USB storage device.
How to edit the settings of an existing network folder shared from a USB drive.
Setting up the extender to share only specific, approved USB devices for enhanced security.
Instructions on how to safely disconnect a USB drive from the extender.
Configuring the extender to function as a DLNA media server for streaming content.
Instructions on how to play media files from a USB drive on a TiVo device.
Steps to install printer drivers and connect a USB printer to the extender.
How to download the ReadySHARE Printer utility for Windows and Mac computers.
Procedure for installing the ReadySHARE Printer utility on computers.
Connecting to and using a USB printer shared through the extender.
Checking and managing the status of the shared USB printer.
Utilizing the scanning functionality of a multifunction USB printer connected to the extender.
Customizing settings for the NETGEAR USB Control Center utility.
Answers to common questions regarding the extender's functionality and setup.
Troubleshooting steps for issues preventing connection to the extender.
Resolving errors encountered when trying to connect the extender to a WiFi network.
Tips and methods to enhance the WiFi connection quality between the extender and router.
Details of the extender's default configuration settings.
Specifications regarding the extender's hardware, power, environment, and emissions.
To Next Page
