EasyManua.ls Logo

NETGEAR FVS318G v2 - Page 2

NETGEAR FVS318G v2
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
August2014
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
2. Enteradminfortheusernameandpasswordforthepassword.
3. ClicktheLoginbutton.
Thewebmanagementinterfacedisplays.
4. ClicktheWeb Browser Accessbutton.
TheRouterStatusscreendisplays.
5. ConguretheVPNrewallforyournetwork.
Formoreinformation,seethesowareadministrationguide.
Troubleshooting Tips
Followingaresometipsforcorrectingcommonproblemsyoumight
encounter:
• Make sure that the Ethernet cables are securely plugged in.
TheWANLink/ACTlightontherewallislitiftheEthernetcabletothe
rewallfromeachmodemispluggedinsecurelyandthemodemand
rewallareturnedon.Foreachpoweredoncomputerconnectedtothe
rewallwithasecurelypluggedinEthernetcable,thecorresponding
rewallLANportLEDislit.
• Make sure that the network settings of the computer are
correct.
ComputersmustbeconguredtoobtainIPandDNSaddresses
automaticallyviaDHCP.Forinformationaboutconguringyour
computertoobtainanIPandDNSaddressviaDHCP,seethereference
manual.
• For cable modem connections, use MAC spoofing.
SomecablemodemISPsrequirethatyouusetheMACaddressofthe
computerregisteredontheaccount.
Support
ThankyouforselectingNETGEARproducts.
Aerinstallingyourdevice,locatetheserialnumberonthelabelofyour
productanduseittoregisteryourproductathttps://my.netgear.com.
YoumustregisteryourproductbeforeyoucanuseNETGEARtelephone
support.NETGEARrecommendsregisteringyourproductthroughthe
NETGEARwebsite.Forproductupdatesandwebsupport,visit
http://support.netgear.com.
NETGEARrecommendsthatyouuseonlytheocialNETGEARsupport
resources.
ForthecurrentEUDeclarationofConformity,visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Forregulatorycomplianceinformation,visit
http://www.netgear.com/about/regulatory/.
Seetheregulatorycompliancedocumentbeforeconnectingthepower
supply.
¾ To use MAC spoofing:
1. SelectWAN1 ISP Settings>Advanced.
2. IntheRouter’sMACAddresssectionselecteitherUsethisComputer’s
MACorUsethisMACaddress.
3. EntertheMACaddressofthecomputerthatisregisteredwithyourISP.
TheroutercapturesandusestheMACaddressofthecomputerthat
youidentied.
4. ClicktheApplybutton.
Yoursettingsaresaved.
5. Restartthenetworkinthecorrectsequence.

Related product manuals