Do you have a question about the NETGEAR FVS318 - ProSafe VPN Firewall Router and is the answer not in the manual?
Model | FVS318 |
---|---|
Category | Firewall |
WAN Ports | 1 |
LAN Ports | 8 |
VPN Pass-through | Yes |
VPN Tunnels | 8 |
SPI Firewall | Yes |
Data Link Protocol | Ethernet, Fast Ethernet |
VPN Protocol | IPSec |
Compliant Standards | IEEE 802.3, IEEE 802.3u |
RAM | 8 MB |
Flash Memory | 4 MB |
Power Supply | External power adapter |
Network / Transport Protocol | TCP/IP, UDP |
Encryption Algorithm | 3DES |
Features | NAT support, URL filtering, DHCP server, DoS attack prevention |
Status Indicators | Port status, power |
Details the firewall's stateful packet inspection and content filtering capabilities.
Step-by-step instructions for physically connecting the firewall, computer, and modem.
Details on configuring the firewall for internet access using the Smart Wizard.
Provides detailed steps for manually configuring the firewall's internet connection settings.
Overview of firewall functions, stateful packet inspection, and content filtering.
Details on restricting access based on web addresses and keywords.
Explains how to create inbound and outbound rules for traffic control.
How to configure inbound rules to make local servers accessible from the internet.
How to define outbound rules to block specific internet services by PCs.
Overview of client-to-gateway and gateway-to-gateway VPN configurations.
Explains secure access from a remote PC to an office network.
Steps to configure a VPN tunnel between a remote PC and a network gateway.
Steps to configure a VPN tunnel between two network gateways.
Describes three methods to activate a VPN tunnel.
How to create and manage IKE and VPN policies for traffic control.
Details on configuring IKE policies for automatic key and authentication.
Steps to diagnose and fix problems connecting to the Internet via the ISP.
Steps to configure a VPN tunnel for the specific case study.
How to test and verify VPN tunnel connectivity.