NETGEAR SRX5308

Questions and Answers:

D
Dr. Erin Haney MDAug 9, 2025
What to do if I am unable to access the NETGEAR Firewall's web management interface?
- M
  Mr. Steven CastroAug 9, 2025
  If you're having trouble accessing the web management interface, here are a few things to try: * Check the Ethernet connection between your computer and the VPN firewall. * Ensure your computer's IP address is on the same subnet as the VPN firewall; if using the recommended addressing scheme, your computer's address should be in the 169.254.x.x range. * If the firewall's IP address has been changed and you don't know it, reset the firewall to factory defaults. * Use the SSL https://address login instead of the http://address login. * Enable Java, JavaScript, or ActiveX in your browser. * Restart your browser. * Verify you're using the correct login information (default is admin for username and password for password).
R
Randy JacksonAug 14, 2025
What to do if NETGEAR SRX5308 Firewall is unable to access the Internet?
- O
  Oscar HowardAug 14, 2025
  If your VPN firewall can't access the Internet, try the following: * Determine if the firewall is getting a WAN IP address from your ISP. * If not, you might need to force your modem or router to recognize the new firewall. * Check if your ISP requires PPP over Ethernet (PPPoE) or another login type. * Enter the host name, system name, or account name provided by your ISP in the Account Name field on the WAN ISP Settings screen. * Inform your ISP that you have a new network device and provide the firewall's MAC address.
R
Richard BakerAug 18, 2025
What to do if time-out error occurs when entering a URL or IP address on NETGEAR SRX5308 Firewall?
- A
  Andrew DelgadoAug 19, 2025
  If you encounter a time-out error when entering a URL or IP address, consider these solutions: * Check if other computers on the LAN are working correctly. * Ensure your computer’s TCP/IP settings are correct. * Make sure the VPN firewall is connected and turned on. * Check your Internet connection, including your modem or router.
L
Logan PetersonAug 23, 2025
How to fix NETGEAR Firewall not saving changes in the web management interface?
- A
  Amy DixonAug 25, 2025
  If your VPN firewall isn't saving changes made in the web management interface: * Be sure to click the Apply button before navigating to another menu or tab; otherwise, your changes will be lost. * Click the Refresh or Reload button in your web browser, as the browser might be caching the old configuration.
P
Pamela RodriguezAug 28, 2025
Why are LAN or WAN port LEDs not on for my NETGEAR SRX5308 Firewall?
- T
  Travis MartinezAug 29, 2025
  If the LAN or WAN port LEDs are not lit on your VPN firewall: * Ensure that the Ethernet cable connections are secure at both the VPN firewall and the connected hub, router, or workstation. * Verify that power is turned on to the connected hub, router, or workstation. * Confirm that you are using the correct Ethernet cables. When connecting the VPN firewall’s WAN ports to devices providing Internet connections, use the cables supplied with those devices.
D
dmckeeSep 3, 2025
How to solve problems with date and time on NETGEAR Firewall?
- N
  norrischristopherSep 3, 2025
  To address date and time issues on your VPN firewall: * If the VPN firewall hasn't successfully reached a network time server, check that your Internet access settings are configured correctly. * Since the VPN firewall does not automatically sense daylight savings time, go to the Time Zone screen and select or clear the Automatically Adjust for Daylight Savings Time check box.

NETGEAR SRX5308 Specifications

General

Device Type	Firewall
VPN Support	Yes
Number of Ports	8
WAN Ports	4
LAN Ports	4
DMZ Ports	1
VPN Protocols	IPSec, PPTP, L2TP
Total VPN Tunnels	125
LAN Ports (Speed)	10/100/1000 Mbps
WAN Ports (Speed)	10/100/1000 Mbps
Memory	128 MB
Flash Memory	32 MB
VPN Encryption	3DES, AES
Firewall Throughput	800 Mbps
Firewall Features	Stateful Packet Inspection (SPI)
Firewall Type	Stateful
VPN Authentication	MD5, SHA-1