System Logs and Error Messages
327
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Firewall Restart
This section describes logs that are generated when the VPN firewall restarts.
IPSec Restart
This section describes logs that are generated when IPSec restarts.
Unicast, Multicast, and Broadcast Logs
Table 86. System logs: VPN firewall restart
Message Jan 23 16:20:44 [SRX5308] [wand] [FW] Firewall Restarted
Explanation Log generated when the VPN firewall is restarted.
This message is logged when the VPN firewall restarts after any changes in the
configuration are applied.
Recommended action None
Table 87. System logs: IPSec restart
Message Jan 23 16:20:44 [SRX5308] [wand] [IPSEC] IPSEC Restarted
Explanation Log generated when the IPSec is restarted.
This message is logged when IPSec restarts after any changes in the configuration
are applied.
Recommended action None
Table 88. System logs: unicast
Message Nov 24 11:52:55 [SRX5308] [kernel] UCAST IN=SELF OUT=WAN SRC=
192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049
Explanation • This packet (unicast) is sent to the device from the WAN network.
• For other settings, see Table 81 on page 324.
Recommended action None
To Next Page
Loading...
Need help?
General