NETGEAR SRX5308 User Manual

Network and System Management
256
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
 To access the CLI:
1. From your computer’s command-line prompt, enter the following command:
telnet 192.168.1.1
2. Enter admin and password when prompted for the login and password information (or
enter guest and password to log in as a read-only guest).
3. Enter exit to end the CLI session.
Any configuration changes made through the CLI are not preserved after a reboot or power
cycle unless you issue the CLI save command after making the changes.
Use a Simple Network Management Protocol Manager
Simple Network Management Protocol (SNMP) forms part of the Internet Protocol Suite as
defined by the Internet Engineering Task Force (IETF). SNMP is used in network
management systems to monitor network-attached devices for conditions that warrant
administrative attention.
SNMP exposes management data in the form of variables on the managed systems, which
describe the system configuration. These variables can then be queried (and sometimes set)
by managing applications.
SNMP lets you monitor and manage your VPN firewall from an SNMP manager. It provides a
remote means to monitor and control network devices, and to manage configurations,
statistics collection, performance, and security.
Manage the SNMP Configuration
 To create a new SNMP configuration entry:
1. Select Administration > SNMP. The SNMP screen displays:
Figure 154.

NETGEAR SRX5308 Specifications

General

Brand	NETGEAR
Model	SRX5308
Category	Firewall
Language	English