NETGEAR SRX5308 - Manage the Configuration File

Network and System Management
258
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Manage the VPN Firewall’s SNMP System Information
The following VPN firewall identification information is available to an SNMP manager:
system contact, system location, and system name.
 To modify the SNMP identification information:
1. Select Administration > SNMP. The SNMP screen displays (see Figure 154 on
page 256).
2. Click the SNMP System Info option arrow in the upper right of the screen. The SNMP
SysConfiguration screen displays:
Figure 156.
3. Modify any of the information that you want the SNMP manager to use. You can edit the
system contact, system location, and system name.
4. Click Apply to save your settings.
Manage the Configuration File
The configuration settings of the VPN firewall are stored in a configuration file on the VPN
firewall. This file can be saved (backed up) to a computer, retrieved (restored) from the
computer, or cleared to factory default settings.
Once the VPN firewall is installed and works correctly, make a backup of the configuration file
to a computer. If necessary, you can later restore the VPN firewall settings from this file.
The Settings Backup and Firmware Upgrade screen lets you do the following:
• Back up and save a copy of the current settings.
• Restore saved settings from the backed-up file.
• Revert to the factory default settings.
• Upgrade the VPN firewall firmware from a saved file on your hard disk to use a different
firmware version.