System Logs and Error Messages
338
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Traffic Meter Logs
Routing Logs
This section explains the logging messages for the various network segments (such as LAN
to WAN) for debugging purposes. These logs might generate a significant volume of
messages.
LAN to WAN Logs
Table 106. System logs: VPN log messages, port forwarding, LAN host and interface
Message 2000 Jan 1 01:35:41 [SRX5308] [portforwarding]
id=SRX5308 time="2000-1-1 1:35:41" fw=192.168.11.1 pri=6 rule=access-policy
proto="Virtual Transport (Java)" src=192.168.11.2 user=sai dst=192.168.11.1 arg=
"" op="" result="" rcvd="" msg="Virtual Transport (Java)"
Explanation A SSL VPN tunnel through port forwarding is established for ID SRX5308 from the
LAN host 192.168.11.2 with interface 192.168.11.1 and logged in with the user
name “sai.”
Recommended action None
Table 107. System logs: traffic meter
Message Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of 10 MB
has reached for WAN1._
Explanation Traffic limit to WAN1 that was set as 10 Mb has been reached.
This stops all the incoming and outgoing traffic, that is, if you selected the Block All
Traffic radio button in the When Limit is Reached section on the WAN TrafficMeter
screen.
Recommended action To start the traffic, restart the traffic limit counter.
Table 108. Routing logs: LAN to WAN
Message Nov 29 09:19:43 [SRX5308] [kernel] LAN2WAN[ACCEPT] IN=LAN OUT=WAN
SRC=192.168.10.10 DST=72.14.207.99 PROTO=ICMP TYPE=8 CODE=0
Explanation • This packet from LAN to WAN has been allowed by the firewall.
• For other settings, see Table 81 on page 324.
Recommended action None
To Next Page
Loading...
Need help?
General