NETGEAR SRX5308 - View the VPN Tunnel Connection Status

Monitoring System Access and Performance
284
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 169.
The active user’s user name, group, and IP address are listed in the table with a time stamp
indicating the time and date that the user logged in.
To disconnect an active user, click the Disconnect table button to the right of the user’s table
entry.
View the VPN Tunnel Connection Status
 To view the status of current IPSec VPN tunnels:
Select VPN > Connection Status. The VPN Connection Status submenu tabs display, with
the IPSec VPN Connection Status screen in view. (The following figure shows an IPSec SA
as an example.)
Figure 170.
The Active IPSec SAs table lists each active connection with the information that is described
in the following table. The default poll interval is 5 seconds. To change the poll interval period,
enter a new value in the Poll Interval field, and then click Set Interval. To stop polling, click
Stop.
Table 72. IPSec VPN Connection Status screen information
Item Description
Policy Name The name of the VPN policy that is associated with this SA.
Endpoint The IP address on the remote VPN endpoint.