Monitoring System Access and Performance
285
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
To view the status of current SSL VPN tunnels:
Select VPN > Connection Status > SSL VPN Connection Status. The SSL VPN
Connection Status screen displays:
Figure 171.
The active SSL VPN user’s user name, group, and IP address are listed in the table with a
time stamp indicating the time and date that the user connected.
To disconnect an active user, click the Disconnect table button to the right of the user’s table
entry.
View the VPN Logs
To view the IPSec VPN logs:
Select Monitoring > VPN Logs. The VPN Logs submenu tabs display, with the IPSec VPN
Logs screen in view:
Tx (KB) The amount of data that is transmitted over this SA.
Tx (Packets) The number of IP packets that are transmitted over this SA.
State The current status of the SA. Phase 1 is the authentication phase, and Phase 2 is the key
exchange phase. If there is no connection, the status is IPSec SA Not Established.
Action Click the Connect table button to build the connection, or click the Disconnect table button to
terminate the connection.
Table 72. IPSec VPN Connection Status screen information (continued)
Item Description
To Next Page
Loading...
