EasyManua.ls Logo

NETGEAR SRX5308 - Use the Rack-Mounting Kit

NETGEAR SRX5308
361 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
18
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Airflow around the unit and through the vents in the side of the case is not restricted.
Provide a minimum of 25 mm or 1 inch clearance.
The air is as free of dust as possible.
Temperature operating limits are not likely to be exceeded. Install the unit in a clean,
air-conditioned environment. For information about the recommended operating
temperatures for the VPN firewall, see Appendix A, Default Settings and Technical
Specifications.
Use the Rack-Mounting Kit
Use the mounting kit for the VPN firewall to install the appliance in a rack. Attach the
mounting brackets using the hardware that is supplied with the mounting kit.
Figure 4.
Before mounting the VPN firewall in a rack, verify that:
You have the correct screws (supplied with the installation kit).
The rack onto which you will mount the VPN firewall is suitably located.

Table of Contents

Related product manuals