Connecting the VPN Firewall to the Internet
24
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
• Auto Detect. Enable the VPN firewall to detect the configuration automatically and
suggest values for the configuration.
• Next. Go to the next screen (for wizards).
• Back. Go to the previous screen (for wizards).
• Search. Perform a search operation.
• Cancel. Cancel the operation.
• Send Now. Send a file or report.
When a screen includes a table, table buttons are displayed to let you configure the table
entries. The nature of the screen determines which table buttons are shown. The following
figure shows an example.
Figure 9.
Any of the following table buttons might be displayed onscreen:
• Select All. Select all entries in the table.
• Delete. Delete the selected entry or entries from the table.
• Enable. Enable the selected entry or entries in the table.
• Disable. Disable the selected entry or entries in the table.
• Add. Add an entry to the table.
• Edit. Edit the selected entry.
• Up. Move the selected entry up in the table.
• Down. Move the selected entry down in the table.
• Apply. Apply the selected entry.
Almost all screens and sections of screens have an accompanying help screen. To open the
help screen, click the Help icon ( ).
Configure the Internet Connections
To set up your VPN firewall for secure Internet connections, you configure WAN ports 1
through 4. The web management interface offers two connection configuration options:
• Automatic detection and configuration of the network connection
• Manual configuration of the network connection
Each option is detailed in a section that follows.
To Next Page
Loading...
