Do you have a question about the NETGEAR GS108Tv2 - ProSafe Gigabit Smart Switch Coming Soon and is the answer not in the manual?
Model Number | GS108Tv2 |
---|---|
Switching Capacity | 16 Gbps |
Forwarding Rate | 11.9 Mpps |
Power over Ethernet (PoE) | No |
VLAN Support | Yes |
Quality of Service (QoS) | Yes |
Management | Web-based |
Operating Temperature | 32°F to 104°F (0°C to 40°C) |
Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
Humidity | 90% maximum relative humidity, noncondensing |
Ports | 8 x 10/100/1000 Mbps Gigabit Ethernet ports |
Jumbo Frame Support | 9, 216 bytes |
Instructions for installing the ProSafe Smart Control Center utility on a PC.
How the utility finds and lists network devices on the network.
An overview of the main features and tabs available in the utility interface.
Information on accessing online help, user guides, and support resources.
Step-by-step guide on how to remove the Smart Control Center utility from a PC.
How to renew IP connections for selected Smart Switches using DHCP.
Procedure for restarting a selected network device via the utility.
How to access device management through a web browser interface.
Guide to setting IP addresses, DHCP, gateway, and other parameters for a device.
Steps to modify the administrator password for a selected network device.
How to upload or download configuration settings for Smart Switches.
Process for updating the firmware on a selected Smart Switch.
How to remove older tasks from the task management list.
Method for deleting individual tasks from the task list.
Instructions on how to change the date and time parameters for scheduled tasks.
Explanation of how to select the network adapter for device discovery.
Provides links to the NETGEAR support website and the user guide.
How to access and download the latest version of the user guide.
How to find support pages, knowledge base, and product forums for devices.
Displays the software version and copyright information for the utility.