14 | Chapter 2. Network
ProSafe Smart Control Center User Guide
Reboot Device
Reboot Device allows you to reboot the selected device. It also supports dual firmware
images. Select either the primary or secondary radio button to show the desired interface.
WARNING!
Rebooting the device will briefly disrupt network traffic through
the device.
To reboot the selected device:
1. From the Network tab, select the device you want to reboot.
2. Click the Reboot Device button.
3. Select either the Primary or Secondary firmware radio button.
4. Enter the current password.
5. Click Apply.
To Next Page
Loading...