NETGEAR MS70 User Manual

Router LED behavior
The following table describes the LED behavior for the LED that is on the front of the
router.
Table 1. Router LED behavior
DescriptionLED color
The router LED pulses white for one of the following reasons:
•
You connected the power adapter to the router. Now the router is booting and
attempting to sync with the satellite.
•
You pressed the Sync button and the router is attempting to sync with the satellite.
•
You pressed the Reset button and the router is resetting to its factory default settings.
Pulsing white
The router finished booting, is connected to the Internet, and is working normally. This
color stays on all the time if the router is working normally.
Solid blue
The router is unable to connect to the Internet.Solid amber
The router's firmware is corrupted.Pulsing amber
User Manual10Overview
Nighthawk Mesh WiFi 6 System with MR70 router and MS70 satellite

NETGEAR MS70 Specifications

General

Brand	NETGEAR
Model	MS70
Category	Wireless Router
Language	English