NETGEAR N300 - Page 7

In the Wi-Fi Configuration page, under Wireless
Network change Wi-Fi name in Name of SSID
field to NETGEAR_1Meg. Under the Security
Options ensure WPA2-PSK (AES) is selected.
Scroll down to the bottom of the page and type
the password of your choice in the Password field.
Click Apply.
In the left hand navigation menu, under
Maintenance click on Set Password. Change the
current password of the Router to your preferred
password and click Apply. The router may ask you
to log in again using the new password.
7 8 9
Almost
there...