NETGEAR WNR2000v3 - N300 Wireless Router - User Manual

NETGEAR
Step 2:
Cable your router.
Step 3:
Cable your computer.
Step 6:
Insert Your CD.
Click Router Setup and follow
the steps to set up a secure
wireless network.
Step 5:
Power On Your Router.
Wait until the power LED
turns solid green.
Step 4:
Power On Your Modem.
Wait until your modem cycles on
(approximately 2 minutes).
Note: If you have a modem with a battery-backup,
remove and re-insert the battery before connecting
your modem to power.
N300 Wireless Router
Modem
(not included)
Power on/off
Resource CD
Laptop or Desktop
Computer
N300 Wireless Router
Resource CD
Package Contents:
N300 Wireless Router
WNR2000v3
Installation Guide
Power AdapterEthernet Cable
Wireless on/off
N300 Wireless Router
WNR2000v3
N300 Wireless Router
WNR2000v3
DSL
or Cable
Internet
Step 1A:
Unplug or power off your modem.
Step 1B:
Cable your modem.
Note: If your laptop does not have a
CD drive, see “No CD Drive” Installation
on the back to complete your router setup.

Summary

Netgear N300 Wireless Router Setup

Package Contents

Lists the items included with the NETGEAR N300 Wireless Router, such as the router, CD, Ethernet cable, and power adapter.

Installation Steps

Guides users through the physical connection and initial power-up sequence for the modem and router.

Router Configuration and Connectivity

No CD Drive Installation

Provides instructions for setting up the router without using the included CD, focusing on browser-based configuration.

Internet and Wireless Setup

Details on configuring internet access and securing the wireless network with a unique name and passphrase.

Connecting Wireless Devices

Instructions on how to connect wireless devices to the router, including using WPS (Push 'N' Connect).

NETGEAR WNR2000v3 - N300 Wireless Router Specifications