NETGEAR Nighthawk C7100V User Manual

8
Join the WiFi Network
You can either use Wi-Fi Protected Setup (WPS) or select your WiFi
network and type its password. For help with the WPS button on
your WPS-enabled device, check the instructions or online help that
came with that computer or device. Some older equipment cannot
use WPS.
Join the WiFi Network Using WPS
For help with the WPS button on your WPS-enabled device, check
the instructions or online help that came with that device. Some
older equipment cannot use WPS.
¾ To join the network using WPS:
1. Press the WPS button
on the modem router for three to
five seconds.
The WPS LED on the button blinks.
2. Within two minutes, on your WPS-enabled device, press its
WPS button or click its onscreen WPS button.
The WPS LED lights solid white when the WPS-enabled device
connects to your modem router.
3. Repeat this process to add other WPS-enabled devices.

NETGEAR Nighthawk C7100V Specifications

General

Ethernet WAN	-
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1900 Mbit/s
WLAN data transfer rate (first band)	600 Mbit/s
WLAN data transfer rate (second band)	1300 Mbit/s
Ethernet LAN	Yes
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA-AES, WPA2-AES
Product type	Tabletop router
Product color	Black
Power source type	DC