EasyManuals Logo

NETGEAR Nighthawk EX7000 Getting Started Guide

NETGEAR Nighthawk EX7000
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Nighthawk
AC1900 WiFi Range Extender
Model EX7000
Quick Start Guide
Hardware
Support
After installing your extender, locate the serial number on the label and use it to register your product at https://my.netgear.com. You must register your product
before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit http://support.netgear.com.
You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product’s user interface.
NETGEAR recommends that you use only the official NETGEAR support resources.
For the current EU Declaration of Conformity, visit: http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United
States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.
NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134 USA September 2014
This LED indicates the 2.4 GHz WiFi connection
between the extender and the router.
Solid green. Best connection
Solid amber. Good connection
Solid red. Poor connection
Off. No connection
This LED indicates the 5 GHz WiFi connection
between the extender and the router.
Solid green. Best connection
Solid amber. Good connection
Solid red. Poor connection
Off. No connection
Solid green. The extender and device are
connected.
Solid green. The Ethernet port has detected an
Ethernet link with the extender.
Solid green. A USB device is connected to the
extender.
2.4 GHz Link Rate LED
5 GHz Link Rate LED
Device to Extender LED
Ethernet ports
1–5 LEDs
USB 3.0 port
Ethernet ports 1–5
Reset button
WPS button
Power button
Power connector
2.4 GHz Link
Rate LED
5 GHz Link Rate
LED
Device to
Extender LED
Ethernet ports
1–5 LEDs
USB LEDs
USB LED
Front Panel and Side Panel Rear Panel
Indicator LEDs

Other manuals for NETGEAR Nighthawk EX7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk EX7000 and is the answer not in the manual?

NETGEAR Nighthawk EX7000 Specifications

General IconGeneral
WiFi Technology802.11ac
Number of Ethernet Ports5
USB Ports1 x USB 3.0
Antenna3 external antennas
ProcessorDual-core 1GHz
WiFi PerformanceAC1900
WiFi Band2.4GHz and 5GHz
Ethernet Port Configuration10/100/1000Mbps Gigabit Ethernet
SecurityWPA/WPA2-PSK

Related product manuals