14
4. On your WiFi-enabled device, open the WiFi connection manager and
locate and connect to one of the following WiFi extender networks:
• 2.4 GHz network. NETGEAR_EXT
• 5 GHz network. NETGEAR_5GEXT
When you join the network, the extender Client Link LED lights
to show that you are connected.
5. Launch a web browser and enter www.mywifiext.net in the address
field.
The New Extender Setup page displays.
6. Click the NEW EXTENDER SETUP button.
The Create Account page displays.
7. Complete the fields on the Create Account page and click the NEXT
button.
8. When prompted, set the network name (SSID), security option, and
password for each access point network and click the NEXT button.
Your settings are applied and the extender is ready to be used as an
access point.
9. Connect you WiFi-enabled device to the new access point WiFi
network using the SSID and password that you created in Step 8.
10. Click the CONTINUE button.
A page displays that says you successfully created an access point.
To Next Page
Loading...
