Need help?Do you have a question about the NETGEAR GS716TP and is the answer not in the manual?
General| Switch type | Managed |
|---|---|
| Switch layer | L2/L3/L4 |
| Quality of Service (QoS) support | Yes |
| Installed SFP modules quantity | 2 |
| Installed SFP+ modules quantity | - |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| 10G support | No |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| MAC address table | 16000 entries |
| Product color | Blue |
| Operating altitude | 0 - 3000 m |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Depth | 204 mm |
|---|---|
| Width | 440 mm |
| Height | 43 mm |
| Weight | 3000 g |
Provides a general overview of the switch's capabilities and purpose.
Details the available methods for configuring and controlling the switch.
Lists and explains the main hardware features of the switch.
Essential safety guidelines and precautions to prevent damage and injury.
Identifies and describes components visible on the switch's front panel.
Explains the meaning and behavior of the various LED indicators on the switch.
Identifies and describes components located on the switch's back panel.
Details the capabilities and specifications of the RJ-45 Ethernet ports.
Describes the SFP ports used for fiber optic connections.
Explains the functionality and usage of the switch's reset button.
Explains the Power over Ethernet (PoE) capabilities and power budget.
Illustrates network configurations using PoE for desktop devices.
Demonstrates using high-power PoE for surveillance and security systems.
Outlines the site requirements and preparation before installing the switch.
Details measures to prevent damage from static electricity during installation.
Lists package contents and guides the user through unpacking the switch.
Provides instructions for mounting the switch in a rack or placing it on a surface.
Describes the procedure for installing optional SFP transceiver modules.
Explains how to connect network devices to the switch's ports.
Steps to verify the physical installation before applying power.
Instructions for powering on the switch and checking status LEDs.
Guidance on the initial steps for managing the switch after installation.
A table detailing symptoms, causes, and solutions for common issues.
Tips and solutions for resolving problems related to Power over Ethernet.
Provides further advice and steps for resolving persistent issues.
To Next Page