NETGEAR GS716TP User Manual

SFP uplink port for fiber connectivity
To enable fiber connections, two SFP fiber uplink ports accommodate a standard small
form-factor pluggable (SFP) gigabit interface converter (GBIC, also referred to as
transceiver modules). GBICs are sold separately from the switch.
Ports 17 and 18 on the switch support the NETGEAR SFP transceiver modules that are
listed in the following table.
Table 3. Supported SFP transceiver modules
DescriptionModelSpeed and Medium
SFP transceiver 1000BASE-SXAGM731F1G Ethernet short-reach fiber
SFP transceiver 1000BASE-LXAGM732F1G Ethernet long-reach fiber
SFP transceiver 1000BASE-TAGM7341G Ethernet copper
For more information about NETGEAR SFP transceiver modules, visit
netgear.com/business/products/switches/modules-accessories.
Note: If you use a third-party passive direct-attach cable (DAC), the length of the cable
must not exceed 5 meters (16.4 feet).
Multi-function Reset button
The switch provides a recessed, multi-function Reset button on the front panel.
Depending on how long you press the button (for details, see the following procedure),
this button lets you perform the following tasks:
•
Restart (power-cycle) the switch. The switch restarts. All saved settings are retained.
We recommend that you save the settings before you press the Reset button to
restart the switch.
•
Reset the switch to factory default settings but maintain the registration status.
All settings are erased and the switch restarts with factory default settings. The
NETGEAR registration status is maintained and not reset.
•
Reset the switch to factory default settings and reset the registration status. All
settings are erased, the switch restarts with factory default settings, and the NETGEAR
registration status is reset. You must reregister the switch with NETGEAR.
Hardware Installation Guide16Hardware Overview
16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

NETGEAR GS716TP Specifications

General

Switch type	Managed
Switch layer	L2/L3/L4
Quality of Service (QoS) support	Yes
Installed SFP modules quantity	2
Installed SFP+ modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
10G support	No
Ethernet LAN data rates	10, 100, 1000 Mbit/s
MAC address table	16000 entries
Product color	Blue
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	3000 g