Need help?Do you have a question about the NETGEAR Nighthawk Mesh WiFi 6 System and is the answer not in the manual?
General| WiFi Technology | WiFi 6 (802.11ax) |
|---|---|
| Antennas | Internal antennas |
| MU-MIMO | Yes |
| OFDMA | Yes |
| Security | WPA3 |
| Beamforming | Yes |
| Backhaul | Dedicated WiFi backhaul |
| Parental Controls | Yes |
| Guest Network | Yes |
| App Support | Nighthawk App |
| Coverage | Up to 4, 500 sq. ft. |
| Speed | Up to 1.8Gbps |
| Number of Nodes | 2 or 3 (depending on the specific model) |
| Bands | Dual-band |
| Ports | Gigabit Ethernet |
| Ethernet Ports | 1 WAN and 3 LAN Gigabit Ethernet ports per node |
| Processor | Quad-core processor |
| Compatibility | Works with any internet service provider |
Details the hardware features and LED indicators of the Nighthawk Mesh WiFi 6 router.
Describes the hardware features and LED indicators for the Nighthawk Mesh WiFi 6 satellite unit.
Provides step-by-step instructions for connecting the Nighthawk Mesh WiFi 6 router to a modem.
Details the process of syncing the Nighthawk Mesh WiFi 6 satellite with the main router.
Explains how to connect devices to the Nighthawk Mesh WiFi 6 system via wired or WiFi.
Details how to install and manage the mesh system using the dedicated Nighthawk mobile application.
Walkthrough for using the setup wizard to automatically configure the router's internet connection.
Provides steps for manually configuring the router's internet connection settings.
Details on configuring IPv6 internet connections when automatic detection fails.
Steps to enable and configure access control rules to manage device internet access.
Leveraging Dynamic Quality of Service (QoS) to prioritize and manage internet traffic for better performance.
How to change the WiFi network's password and adjust security settings like WPA2/WPA3.
Instructions for checking and installing the latest firmware for the router and satellite.
Steps to change the administrative password for accessing the router's settings.
Procedure to reset the router's admin password if it has been forgotten.
Procedure for resetting the router or satellite to its original factory default configuration.
Configuring port forwarding rules to allow specific incoming internet traffic to reach local servers.
Instructions for setting up a virtual private network (VPN) connection to access the router remotely.
Allowing VPN clients to use the home network's internet service when accessed remotely.
Solutions for issues preventing login to the router's web interface.
Steps to diagnose and fix problems preventing internet access through the router.
To Next Page