NETGEAR Nighthawk Mesh WiFi 6 System User Manual

This value represents the number of routers between your network and the
destination. Usually, a setting of 2 or 3 works, but if this is a direct connection,
set it to 1.
10. Click the Apply button.
Your settings are saved. The static route is added to the table on the Static Routes
page.
Edit a static route
To edit a static route:
1.
Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5.
In the table, select the radio button for the route.
6. Click the Edit button.
The Static Routes page adjusts.
7.
Edit the route information.
8. Click the Apply button.
Your settings are saved.
Delete a static route
To delete a static route:
1.
Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2.
Enter http://www.routerlogin.net.
A login window opens.
User Manual73Manage Network Settings
Nighthawk Mesh WiFi 6 System

NETGEAR Nighthawk Mesh WiFi 6 System Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Antennas	Internal antennas
MU-MIMO	Yes
OFDMA	Yes
Security	WPA3
Beamforming	Yes
Backhaul	Dedicated WiFi backhaul
Parental Controls	Yes
Guest Network	Yes
App Support	Nighthawk App
Coverage	Up to 4, 500 sq. ft.
Speed	Up to 1.8Gbps
Number of Nodes	2 or 3 (depending on the specific model)
Bands	Dual-band
Ports	Gigabit Ethernet
Ethernet Ports	1 WAN and 3 LAN Gigabit Ethernet ports per node
Processor	Quad-core processor
Compatibility	Works with any internet service provider