NETGEAR Nighthawk Mesh WiFi 6 System User Manual

5.
Select the Default DMZ Server check box.
6. Type the IP address.
7. Click the Apply button.
Your settings are saved.
Change the Router’s Device Name
The router’s default device name is based on its model number. This device name
displays in the file manager when you browse your network.
To change the router’s device name:
1.
Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.
In the Device Name field, type a new name.
6. Click the Apply button.
Your settings are saved.
Change the LAN TCP/IP settings
The router is preconfigured to use private IP addresses on the LAN side and to act as
a DHCP server. The router’s default LAN IP configuration is as follows:
•
LAN IP address. 192.168.1.1
•
Subnet mask. 255.255.255.0
User Manual59Manage Network Settings
Nighthawk Mesh WiFi 6 System

NETGEAR Nighthawk Mesh WiFi 6 System Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Antennas	Internal antennas
MU-MIMO	Yes
OFDMA	Yes
Security	WPA3
Beamforming	Yes
Backhaul	Dedicated WiFi backhaul
Parental Controls	Yes
Guest Network	Yes
App Support	Nighthawk App
Coverage	Up to 4, 500 sq. ft.
Speed	Up to 1.8Gbps
Number of Nodes	2 or 3 (depending on the specific model)
Bands	Dual-band
Ports	Gigabit Ethernet
Ethernet Ports	1 WAN and 3 LAN Gigabit Ethernet ports per node
Processor	Quad-core processor
Compatibility	Works with any internet service provider