Need help?Do you have a question about the NETGEAR EX6150 AC1200 and is the answer not in the manual?
General| Device Type | WiFi Range Extender |
|---|---|
| Model | EX6150 |
| WiFi Technology | 802.11ac |
| WiFi Performance | AC1200 |
| WiFi Speed | Up to 1200 Mbps |
| Security | WEP, WPA/WPA2-PSK |
| Modes | Range Extender, Access Point |
| Frequency Band | 2.4GHz and 5GHz |
| Ethernet Ports | 1 x Gigabit Ethernet port |
| Antenna | 2 x External Antennas |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% non-condensing |
| Weight | 0.29 kg |
Familiarize yourself with the extender's LEDs, buttons, and port for identification.
Indicates the connection status between the extender and the router/access point.
Indicates the connection status between the extender and a computer or WiFi device.
Shows the power status: booting, powered on, or powered off.
Indicates WiFi security status and WPS connection progress.
Configure the switch to 'Extender' mode for WiFi range extension.
Position the extender near the router and plug it into an electrical outlet.
Connect the extender to your WiFi network using the WPS button.
Connect the extender using a web browser for manual setup.
Connect your computer/device to the extender's default WiFi network.
Launch a browser and navigate to www.mywifiext.net for setup.
Click the 'NEW EXTENDER SETUP' button to begin the configuration.
Complete the setup screen fields and verify the switch setting.
Choose the network to extend and enter its password.
Configure the SSID and password for the extended WiFi networks.
Select the confirmation checkbox and click Next to finalize connection.
Finalize setup, complete registration, and position for optimal connection.
Ensure the extender is set up and connected to the WiFi network.
Plug an Ethernet cable from the device into the extender's Ethernet port.
Configure the switch to 'Access Point' mode to create a WiFi hotspot.
Plug in the extender and connect it via Ethernet to your router or LAN jack.
Connect your device to the extender's new WiFi network (NETGEAR_EXT).
Set up the network name (SSID) and password for the new WiFi hotspot.
Connect your computer or WiFi device to the new extended WiFi network.
Launch a browser and go to www.mywifiext.net to log in.
Log in with your email and password to view or change settings.
Troubleshoot issues with network password entry during setup.
Clarifies that extender mode requires wireless connection, not Ethernet.
Steps to recover or reset login credentials for extender access.
Procedure to reset the extender to its original factory settings.
Guidance on configuring router MAC filters for extender compatibility.
Steps to resolve issues when the web browser setup guide is not accessible.
Information on registering your product and accessing support resources.
Legal information regarding NETGEAR trademarks and copyrights.
Links to EU Declaration of Conformity and regulatory information.
To Next Page