To restart or reset the switch using the Reset button:
1. Insert a tool such as a straightened paper clip into the opening.
2.
Do one of the following:
•
Restart the switch. Press the Reset button for less than 5 seconds. (Do not press
the button for more than 5 seconds!)
•
Reset the switch to factory default settings but maintain the registration
status. Press the Reset button for more than 5 seconds but less than 10 seconds.
(Do not press the button for more than 10 seconds!)
•
Reset the switch to factory default settings and reset the registration status.
Press the Reset button for more than 10 seconds.
During the restart or reset process, the Power LED lights yellow.
Hardware Installation Guide17Hardware Overview
16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
To Next Page
Loading...
