NETGEAR Nighthawk X4 - Page 6

4
4. Add power to the router:
a. Connect the power adapter to the router and plug the
power adapter into an outlet.
b. Wait for the Power LED on the front panel to light amber
and turn white.
If no LEDs are lit, press the Power On/Off button on the
rear panel of the router.
5. Connect a computer or WiFi device.
You can use an Ethernet cable to connect a computer to the
router or you can use WiFi to connect a computer or WiFi
device to the router:
• For a wired connection, use an Ethernet cable (not included)
to connect your computer to a black Ethernet port on your
router.
• To connect your computer or WiFi device to the router with
WiFi, use the WiFi settings on the product label.
Ethernet
cable
Modem
Cable or
DSL
Ethernet
cable
Internet
Power
adapter
Router
Router
Ethernet
cable
Modem
Internet
Power
adapter
Cable or
DSL
Power
adapter
Computer