Need help?Do you have a question about the NETGEAR Nighthawk X4S AC2600 and is the answer not in the manual?
General| WiFi Technology | 802.11ac |
|---|---|
| WiFi Range | Very large homes |
| Memory | 128MB Flash and 512MB RAM |
| Ethernet Ports | 5 x 10/100/1000Mbps Gigabit Ethernet ports (1 WAN & 4 LAN) |
| MU-MIMO | Yes |
| Beamforming | Yes |
| Model Number | R7800 |
| Antenna | 4 external antennas |
| QoS | Yes |
| VPN Support | Yes |
| WiFi Performance | AC2600 (800 Mbps + 1733 Mbps) |
| Processor | 1.7GHz dual-core processor |
| WiFi Band | Dual-band (2.4GHz & 5GHz) |
Details the router package contents including the router, antennas, power adapter, and Ethernet cable.
Identifies status LEDs and buttons located on the top surface of the Nighthawk X4S router.
Illustrates the rear panel layout, including power, reset button, and LED On/Off switch.
Instructions on how to turn the router's indicator LEDs on or off using the rear panel switch.
Step-by-step guide for attaching the four antennas to the router for optimal WiFi signal.
Locates the USB 3.0 ports on the left and the eSATA port on the right panel of the router.
Guidance on connecting an external eSATA storage device to the router.
Recommendations for positioning the router to maximize WiFi range and minimize interference.
Instructions for connecting the router to your modem and power source.
Explains how to connect to the router via wired Ethernet or WiFi.
Differentiates between ISP, WiFi network, and router login types for clarity.
Guides on using a web browser to access and configure router settings.
Details the automated process for setting up the router's internet connection.
Instructions for automatic setup when two routers are present on the network.
How to use NETGEAR genie Apps for router access and management.
To Next Page