NETGEAR Nighthawk X4S

5
3. Connect your modem:
a. Plug in, then turn on your modem.
b. If you removed the batteries, replace them.
c. With the Ethernet cable that came with the router, connect
your modem to the yellow Internet port on your router.
4. Add power to the router:
a. Connect the power adapter to the router and plug the
power adapter into an outlet.
b. Wait for the Power LED on the front panel to light amber
and turn white.
If no LEDs are lit, press the Power On/Off button on the
rear panel of the router.
Ethernet
cable
Internet
Cable or
DSL
Router
Power
adapter
Cable or
DSL
Internet
Router
Ethernet
cable
Modem
Modem